MS34 Satellite Switch, Multi-Switch, 4 Outlets Max, Silver

It seems the MS34 Satellite Switch (also known as a 3‑in/4‑out DiSEqC multiswitch) is a compact device that lets you power up to four satellite receivers from three LNB inputs.

---

📡 Key Features & Specs

• 3 Inputs → 4 Outputs: Connects up to three separate LNBs and distributes the signal to four receivers 

• DiSEqC‑compliant: Works with DiSEqC 1.0/1.1, enabling automatic signal switching based on receiver commands 

• Frequency range: Covers the standard 950–2150 MHz satellite band 

• Isolation rated ~25 dB: Helps minimize crosstalk between outputs .

• Metal or plastic housing (silver‑colored design common) — typical inline mounting between LNB and dish.

---

✅ Pros & Considerations

• ➕ Signal quality is generally clean; minimal loss expected.

• ➖ No built-in amplifier—long cable runs may need a separate amplifier.

---

🔧 Installation Tips

1. Mounting: Usually placed outdoors, near the dish. Make sure it's weather‑protected.

2. Power: The switch is powered through the coax from receivers. Ensure one receiver is active to power DiSEqC.

3. Cabling: Use good-quality F‑type coax. If you have long runs (over 50 m), consider adding a dedicated amplifier.

4. Receiver Setup: Configure DiSEqC settings per LNB in each receiver’s menu.